PDA

View Full Version : Brand new LM-1 has bad aux out?


MJRWOOD
06-07-2007, 08:18 PM
Aux out 2 on my new LM-1 is stuck at ~2.0 volts and does not change when I blow on the sensor. The LM-1 display shows anywhere from AFR=6 to AFR=40, but analog out #2 stays at 2 - 2.2 volts. I confirmed the outputs are calibrated to factory default. Should I send it back for exchange?

MJRWOOD
06-07-2007, 09:32 PM
Nevermind I figured it out. I was looking at lambda, not AFR. It works fine.