PDA

View Full Version : Help with Maft Pro base tune


mk3dude
12-05-2008, 10:21 PM
Hi Guys I own a 1987 Toyota supra and i recently installed the maft pro with 4.8 and followed the quick setup guide and the car started up no problem. i was amazed as to how easy it was to set it up. The motor is a turbo 7mgte metal head gasket and arps. stock turbo, 3' exhaust all the way back, 2.5 intercooler hardpipes. my question is i connected the maft pro to the tuner pro and was able to download my settings. I ownladed them while the car was off. I was wondering if you guys would be able to let me know if i have everything setup as directed. and what i should change if anything.

Thanks again for all you help!!

------------------------
TunerPro Bin Data Export
------------------------
Source File: Tpro4400XDF_ADS.zip
Source Definition: TPro4800.xdf

------------------------------
Constants
------------------------------

Vehicle Select 00
Number of Cylinders 6
Displacement 3.00 Liter
Airflow Source 0x00 Select
Manifold pressure source 00
Load Source 0x00
Barometer Comp Mode 00
Frequency Out Mode 0x04
V Out1 Mode 0 Select
V Out2 Mode 0 Select
AFR Source 1 Select
Freq In Mode 0
Aux 1 mode 00
Main Scale 0.00
Volts Out 1 Setpoint 2.45
Volts Out 2 Setpoint 3.53
Afterstart enrichment 0.00
Tune Load Point, Low 36.40
Tune Load Point, Mid 100.10
Tune Load Point, High 143.00
Freq Out Max 0
Timing Monitor, Base Adjust 0.00
Timing Monitor, Correction 1.27
AFR Tracking, Enable delay 0.00 Seconds
FE Smoothing 00
Boost control TPS Spool 2.50
Boost control RPM Spool 2400 RPM
Boost control TPS Start 3.70 Volts
Boost control PSI Start 5.00 PSI
Boost control DC% Start 10.00 Percent
Boost control PSI Set 10.00 PSI
Boost control PSI Aux 10.00 PSI
Boost Control Gain 4.00
Boost Control DC% Start Aux 10.00 Percent
Boost Control Max RPM 0.00
AFR Min TPS 4.90
AFR Min RPM 3200
AFR Min Load 166.50
AFR correction lean limit 10.00
AFR correction rich limit 10.00
AFR correction gain 4.00
AFR Aux % 0.00
TPS Enrichment 0.50
TPS Decay 0.80
Throttle Body Size 7
TPS MAP Max 104.06
MAP Enrichment 0.40
Boost Enrichment 0.10
MAP TPS Min 0.40 Volts
MAP RPM Min 2560.00
MAF Limit TPS Threshold 0.00 Volts
MAF Limit 0.00
MAF Limit / KRPM 0.00 Grams/Sec
Part Throttle Tracking Idle TPS 0.00
Part Throttle Tracking Idle RPM 640.00
Part Throttle Tracking Idle A/F Ratio 14.70
Part Throttle Tracking Cruise TPS 0.00
Part Throttle Tracking Cruise RPM 2560.00
Part Throttle Tracking Cruise Load 91.05
Part Throttle Tracking Cruise A/F Ratio 14.50
Part Throttle Tracking Lean Load 84.55
Part Throttle Tracking Lean Delay 10.00
Part Throttle Tracking Lean A/F Ratio 14.60
Part Throttle Tracking Gain 15.00

mk3dude
12-08-2008, 06:21 PM
anybody?

TurboBob
12-09-2008, 11:34 AM
looks ok at first glance.

How is the car running?

Bob

mk3dude
12-09-2008, 09:57 PM
The car runs good actually i have not driven it since it is stored for the winter but it starts up and idles with no hesitation. but the afr seem to be around 12-11.5 im not sure if thats normal. but how would i get it to idle around the 14.7 range

Thanks you in advance

CPT Furious
12-10-2008, 02:41 AM
mk3dude,

It looks like you and I may have some similar issues. There is some good info in my thread in this section. Hope that helps!

mk3dude
12-10-2008, 06:01 AM
Thanks for the reply "CPT Furious (http://www.fullthrottletech.com/member.php?u=1953)" i will take look at it. have you done anything to improve it?

CPT Furious
12-10-2008, 11:07 AM
So far, just what Bob has asked me to do. The latest thing was adjusting the lower end of the VE table. I'm driving the car today, so we'll see how it goes!

mk3dude
12-10-2008, 04:03 PM
ok sounds good. let me know how it goes

CPT Furious
12-10-2008, 11:29 PM
Check the thread for updates...got some more data from today...

mk3dude
12-11-2008, 03:33 AM
is there anyway you would be able to send me you full settings so i can compare?

JCFsupra
05-24-2009, 06:13 PM
MK3dude I see that your in Toronto. Is there anyone up there experienced with the Maft Pro that can fine tune it in my 89 Supra Turbo Automatic. I'm down in Windsor and don't feel like going back over to Michigan to have the guy there play around with it some more. First he's too costly and second didn't do other work right so I don't know if I can trust him tuning since he hasn't tuned the MaftPro that much and especially not in Supras.