How to tune at WOT to keep a good AFR?

[CarlosPTR210]

How to tune at WOT to keep a good AFR?

A FE Smoothing question?

What can adjust if I change it?

I try to find some information in the manual V 5.0 with out luck L

The issue is that I begging to tune the car, so under WOT the AF reading change constantly from 11. 3 to 12.3, I set the AFT to 11.5.

What can adjust to try to keep a 11.5 reading?

TPS Enrichment 0.40
TPS Decay 0.60
Throttle Body Size 8
Main scale -15

AF User Tune Hi

RPM
1200 1600 2200 2800 3400 4000 4600 5200 5800 6400 7000
0.0 0.0 -5.0 -7.0 -8.0 -11.0 -11.0 -11.0 -11.5 -11.5 -10.0

[Rogue_Ant]

FE Smoothing doesn't have any effect here. Neither does your TPS enrichment/decay or throttle body size.

Are you using WOT Tracking? If so, post up your settings.


-Rogue

[CarlosPTR210]

Originally Posted by Rogue_Ant

FE Smoothing doesn't have any effect here. Neither does your TPS enrichment/decay or throttle body size.

Are you using WOT Tracking? If so, post up your settings.


-Rogue

AFR Min TPS 2.46
AFR Min RPM 3008
AFR Min Load 100.16
AFR correction lean limit 8.00
AFR correction rich limit 10.00
AFR correction gain 4
AFR Aux % 0.00
AFR Tracking, Enable delay 0.00 Seconds
TPS Enrichment 0.40
TPS Decay 0.60
Throttle Body Size 8
TPS MAP Max 100.16
MAP Enrichment 0.40
Boost Enrichment 0.40
MAP TPS Min 0.54 Volts
MAP RPM Min 896

[Rogue_Ant]

Do you have a log that you can post?


-Rogue

[CarlosPTR210]

Originally Posted by Rogue_Ant

Do you have a log that you can post?


-Rogue

attach is the file Cvs for your review!