|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
| Home | Online Store | Product Manuals | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#2
11-22-2007, 01:10 AM
|
||||
|
||||
Do you have a wiring diagram?
Rogue
__________________
'86 944 Turbo (951) E-85 Fuel Convert Powerhaus K27DR Turbo MAF Translator Pro - MAP Conversion! With Knock Monitoring! Motronic Enhanements Custom Chip By Hally! Corrected: 390 RWHP, 417 RWTQ @ +5200ft :burnout: See my build-up here! '02 GSX-R 750 Stock w/ Yoshi slip-on 
|
|
#4
12-01-2007, 10:16 PM
|
|||
|
|||
|
It will be the standard Voltage MAF configuration
Pink - +12 volts Black - Ground Yellow - MAF signal in Brown - MAF signal out. Set MAF In for TPI Set MAF out for "Not Selected" Set V out 1 for TPI Bob
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Wiring instruction for GEN II to TPI PCM
Linear Mode
