|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
| Home | Online Store | Product Manuals | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
01-27-2008, 01:35 PM
|
|||
|
|||
Scanmaster versions
below are the 3 basic flavors of scanmaster. Only the really old ones can't be updated. The basic determining factor is whether there is a 40 pin pattern on the circuit board. If the Scanmaster has a 24 pin chip, but there is a 40 pin pattern on the board, then it can be updated if you send it in.
The pictures are: Can't be updated..............send it in for update...................easy to update, just plug in the chip 
|
|
#2
12-28-2011, 01:19 PM
|
||||
|
||||
Have a local buddy with a 40 pin Buick Scammaster 2.1 that is soldered onto the baord. (??) He also has the PL 2.2 upgrade chip.
What does it cost to upgrade?
__________________
In GOD We trust, all others must provide data.  Pictures Before you ask: YES, Already replaced that too, TWICE!
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
